dreamcast (pal) with GDEMU make the PSU getting extremely hot.
Hi, i noticed that the heat of psu is changed and become more noticeable after installing the GDEMU on my pal dc, you can't even touch the capacitors because of how hot it's... so i searched online and i found a lot of posts that mention the same problem, i saw some people saying that the problem is most appear with pal version of Dreamcast... so i did some testing and i changed the pal psu with the one i took from American 120v Dreamcast (working fine with 220v by replacing one capacitor) and the heat now is really acceptable nothing can burn the skin if you touched it after i turned off, so I don't know if this could be true that all pal psu will getting extremely hot with the GDEMU but in my case it did, also this could be an alternative if anyone has more than one DC instead of buying aftermarket psu you can use the NTSU Dreamcast PSU
Hi, i noticed that the heat of psu is changed and become more noticeable after installing the GDEMU on my pal dc, you can't even touch the capacitors because of how hot it's... so i searched online and i found a lot of posts that mention the same problem, i saw some people saying that the problem is most appear with pal version of Dreamcast... so i did some testing and i changed the pal psu with the one i took from American 120v Dreamcast (working fine with 220v by replacing one capacitor) and the heat now is really acceptable nothing can burn the skin if you touched it after i turned off, so I don't know if this could be true that all pal psu will getting extremely hot with the GDEMU but in my case it did, also this could be an alternative if anyone has more than one DC instead of buying aftermarket psu you can use the NTSU Dreamcast PSU